FAQs

What is Activator D?

Activator D is the easier, safer, more economical and effective way to treat and maintain the sparkle in your pool!

The product comes in two bottles - a powder and a liquid - totalling 850 grams. This is enough for a 50,000 litre pool for one month. It is safe when used correctly, economical and very effective.

The normal dose is one treatment pack per 50,000 litres per month. The manufacturer’s troubleshooting guide recommends a double dose only for a really neglected pool. Contact us for guidance before exceeding the normal monthly dose. Black algae will disappear over a few weeks, and should be brushed off the walls. (Chlorine does not kill algae, only bleaches it; this is why during a storm the chlorine is drawn from the water and the algae is once again visible, turning the water green.)

Activator D does not hurt eyes or skin when used correctly, and swimming costumes last longer. It is non-corrosive and chlorine-free. Follow the product label and safety sheet for handling and disposal.

Is Activator-D gentle on eyes and swimwear?

Activator-D is described as safe for swimwear and does not cause burning eyes when used as directed.

Does Activator D work for my jacuzzi?

You Bet!

Add just a tablespoon from each bottle of the Activator D, and the water in your jacuzzi or spa bath will turn clear in front of your eyes

How do I use Activator D?

First off, thank you for purchasing Activator D!

Handle the supplied product carefully. It is harmful if swallowed and can cause serious eye damage. Follow the protective-equipment and handling instructions on the product label and safety sheet.

  1. Ensure your pool's pH level is between 6.8 - 7.2
  2. Ensure alkalinity level is between 80-120ppm
  3. Backwash the pool filter for 2–3 minutes.
  4. Switch off the pump before disconnecting the pool-cleaner hose from the weir. Set the valve to filter and restart the pump.
  5. With the motor running and the valve set in filter position, add the Activator-D powder to the weir, then add the liquid immediately afterwards. Do not pour directly into the pool.
  6. Switch off the pump, reconnect the pool-cleaner hose, then restart the pump and run it for 8–12 hours. Then resume the normal pool cleaning cycles.
  7. Brush stubborn algae if necessary, then vacuum or allow filtration to remove dead algae.
  8. Repeat the treatment monthly and enjoy your clearer pool.

If you have a pool that is used regularly by a lot of people like a hotel or public pool, consider adding a little bit of chlorine to the weir.

For the best results we recommend adding one cup of chlorine to the filter per 3-sand-bag-filter every week. It is important to add the chlorine directly to the weir, to ensure it is properly absorbed in the system.

How do I calculate the volume of my pool?

For a rectangular pool, calculate litres as length × width × actual average depth in metres × 1,000.

Example: 8 m × 4 m × 1.5 m × 1,000 = 48,000 litres. This example applies only when the pool's actual average depth is 1.5 m; do not assume this depth for your pool.

Use measured dimensions where possible. If the depth is unknown or the pool is irregularly shaped, measure it or ask us for help before choosing a treatment quantity.

A pool of roughly 50 000 litres will require one treatment of Activator D each month.

If your pool is approximately 25 000 litres (between 20 000 - 30 000) you will only need to add half of each bottle of the Activator D duo to your pool each month to keep it sparkling clean and algae free.

Does Activator D kill bacteria?

Yes. Activator D does kill bacteria to a certain extent, and under normal conditions. Activator D is sufficient for cleansing the water in your home pool, as well as keeping it free of algae.

However, Activator D does not kill Ecoli (found in human faeces) and we recommend that for extra protection, especially with extensive pool use in "high traffic" pools such as hotels, schools and public swimming baths, a little chlorine should be added to the weir. As well as other anti Bacterial products.

Starting 3 days after adding Activator D, ONCE WEEKLY add one cup of chlorine per 3-bag filter mixed with water into the weir with pump running on "filter". DO NOT sprinkle chlorine directly into pool water - it works through the filters and will not register in pool water.

Can Activator D be used with other chemicals in the pool?

The manufacturer’s troubleshooting guide permits use alongside other pool treatments. This is not permission to mix concentrated chemicals together. The safety sheet lists alkalis and oxidising agents as incompatible materials. Follow the product labels and contact us if you’re unsure about a particular combination.

Does Activator D contain copper?

Yes. Activator D contains copper sulphate, an active ingredient used to help control algae. When used as directed, it is designed to be safe for swimmers and your pool. Activator-D has been in business for more than 15 years.

Can I use Activator D as a "shock treatment"?

The normal dose is one treatment pack per 50,000 litres per month. The manufacturer’s troubleshooting guide recommends a double dose only for a really neglected pool. Contact us for guidance before exceeding the normal monthly dose.

Need help?

Please follow the troubleshooting guide here.

Troubleshooting

Persistent black algae: Brush affected areas, keep filtration running, and repeat the monthly treatment as directed. If it persists, contact us for guidance.

Blue staining or unusual water colour: Stop adding product and contact Activator-D for guidance before adding anything else.

How often should I use Activator-D?

Use Activator-D once every month as part of your regular pool maintenance routine.

Can I use Activator-D with chlorine?

Yes. Follow the product instructions for your swimming pool.

Does Activator-D help with black algae?

Activator-D is designed to help control black and green algae when used correctly.

Is Activator-D suitable for painted pools?

Yes. Follow the recommended directions for your pool surface.

Do you deliver across South Africa?

We deliver across South Africa, including outlying areas. Delivery of one pack costs more to outlying areas than to major city centres. Your delivery charge is shown at checkout.